Anyone do the F-Body rear disk brake conversion?

I picked up some LS-1 and LT-1 parts to do the conversion but I am hung up on whether or not I want to use the relocation brackets with the LT-1 setup or the LS-1 with the stock backing plate.
DSC_0548.jpgcaliper2.JPGcaliper1.JPG

Here are a couple good writeups for anyone that is curious on what is needed to do the conversion:

LT1:
http://www.flynbye.com/catalog/i30.html

http://www.thirdgen.org/techboard/br...drum-rear.html

LS1:
http://www.turbobuick.com/forums/thr...e-swap.206369/