Announcement

Collapse
No announcement yet.

My Turbocharged 1986 Cutlass Video

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • My Turbocharged 1986 Cutlass Video

    Its just a video of my 1986 Oldsmobile Cutlass with a stock BBO and Holset HX60 turbocharger and also check out my profile, thanks

    http://www.streetfire.net/video/1986...ed_2242957.htm

  • #2
    Very cool!
    What's the car runnin in the quarter?
    I have a DX 440 I'm putting together with a twin turbo setup, just in the early stages right now...
    Lightning Rods repair service:CLICK HERE
    Seller Feedback:CLICK HERE
    1988 H/OCA Advisor
    88 H/O #1 of 4
    88 CSC White/Claret - T-tops
    88 H/O Triple Black
    87 442 Black/Gray - T-tops
    85 442 White/Blue - T-tops
    85 442 White/Blue - T-tops
    85 442 White/Claret - T-tops
    85 442 White/Sage
    84 H/O Aero Commemorative #2199 - Sunroof
    83 H/O #2400 Sand Gray - Sunroof
    83 H/O #1607 Sand Gray - T-tops
    83 H/O #727 Maple
    "Keep them Rockets lit!"

    Comment


    • #3
      Its in the early stages, it going to the dyno next....to see what it does with 8lbs of boost. I will post the video in of the dyno results....Just hope I do not blow a headgasket

      Comment


      • #4
        You may have to ring the block to avoid the head gasket issue, I've heard that these motors don't have enough head bolts to keep the head secure.
        Lightning Rods repair service:CLICK HERE
        Seller Feedback:CLICK HERE
        1988 H/OCA Advisor
        88 H/O #1 of 4
        88 CSC White/Claret - T-tops
        88 H/O Triple Black
        87 442 Black/Gray - T-tops
        85 442 White/Blue - T-tops
        85 442 White/Blue - T-tops
        85 442 White/Claret - T-tops
        85 442 White/Sage
        84 H/O Aero Commemorative #2199 - Sunroof
        83 H/O #2400 Sand Gray - Sunroof
        83 H/O #1607 Sand Gray - T-tops
        83 H/O #727 Maple
        "Keep them Rockets lit!"

        Comment


        • #5
          I am sure MLS headgaskets and ARP headbolts will help when I push it to 12lbs of boost, for now I will just keep it around 8 lbs of boost....for now.

          Comment

          Working...
          X